4.9 Star Google Rating
Control From Anywhere
Add app control to your existing ducted or split system. Zones, schedules and temperature from your phone, in any room, from anywhere. Supplied, installed and set up across Sydney.
App Control, Done Properly
A Wi-Fi upgrade turns your air conditioning from something you operate at a wall panel into something you actually control. Set a room to the temperature you want before you leave work. Turn the system off because you forgot. Change one bedroom without touching the rest of the house.
The hardware is the easy part. What decides whether the upgrade is any good is whether the controller suits your system, whether the zones are wired correctly, and whether it was commissioned by someone who understands your ductwork. We install and set up Wi-Fi control on ducted and split systems across Sydney, and we tell you honestly when your existing unit cannot take one.
A Wi-Fi upgrade replaces the fixed wall controller with a connected one, or adds a module that lets an existing controller talk to your network. Once it is on, you get the same control you had at the wall, plus three things you did not have: the ability to control it from somewhere else, the ability to schedule by zone instead of by whole house, and a record of what the system has been doing.
| System | What is usually possible | What it needs |
|---|---|---|
| Ducted with existing zoning | Full app control per zone, schedules, temperature limits | A compatible controller and a working damper loom |
| Ducted without zoning | Whole of house control, schedules, timers | A controller, and often the zone dampers added at the same time |
| Multi split | Per head control from the app, usually through the manufacturer gateway | A gateway module matched to the brand and model |
| Single split | Basic on, off, mode and temperature from the app | A Wi-Fi module that the model supports |
| Older systems | Varies widely, some cannot be connected at all | Model and serial check before we quote |
We take the model number from the indoor unit and confirm what the controller will and will not do with it. This is where most cheap quotes fall over: a controller that is not compatible turns into a conversation two weeks later.
The controller has to talk to your dampers, your fan and your outdoor unit. That means wiring at the indoor unit and, on ducted systems, at the zone dampers. Then it gets commissioned: zones named, minimum and maximum temperatures set, schedules built, app paired and tested while we are standing there.
You get the app set up on your own phone, not ours, with your zones labelled the way you think about your house. Bedrooms by name, not zone three.
A Wi-Fi controller will not fix a badly designed zone layout, a room with no vent, or a system that is undersized for the house. It gives you better control of what is already there. If the real problem is airflow, the fix is additional vents or a zoning review, not an app.
It also will not make an old system efficient. If your unit is fifteen years old and struggling, an app just lets you watch it struggle from your phone.
Controllers differ in how many zones they run, whether they support temperature sensing per room, whether they work with voice assistants, and how good the app actually is. If you have been quoted a specific controller such as iZone or AirTouch, we can tell you whether it suits your system and whether a simpler one would do the same job.
Already have zones you cannot control properly? That is a custom zone control job first, and the app second. Only got one room that misbehaves? Start with extra vents. And if your ducted system itself needs attention, see ducted air conditioning or book servicing. For everything else, head back to air conditioning add-ons, or start at air conditioning Sydney.
What Sydney homeowners ask before adding app control to their system.
Often yes, but it depends on the model. Ducted systems with zoning usually take a connected controller well. Multi splits usually need a manufacturer gateway matched to the brand. Single splits need a module the model supports. Send us the model number from the indoor unit sticker and we will confirm before you commit to anything.
