4.9 Star Google Rating
Published on 01 Sep 2026

Why the Checklist Matters

Not every air conditioning service is created equal. Some providers offer a “service” that amounts to a filter rinse and a quick turn-on test. That’s not enough to keep your system running efficiently or catch the faults that build up over 12 months of Sydney summers. Knowing what should be done — and asking for it — protects your investment.

The Full Split System Maintenance Checklist

1. Indoor Unit Filter Clean

The air filter captures dust, pet hair, and allergens before they reach the coil. A clogged filter restricts airflow, drops cooling efficiency, and forces the coil to ice up. The technician removes the filter, washes it, inspects it for tears, and reinstalls it. If the filter is damaged beyond cleaning, it’s replaced.

2. Evaporator Coil Clean (Indoor Unit)

The evaporator coil is the cold coil inside the indoor unit that actually cools the air. Over time, fine dust and mould build up on the coil fins — even with a clean filter, because filters aren’t perfect. A dirty coil reduces heat transfer efficiency, causes higher power consumption, and produces musty odours. The technician applies a coil cleaner and rinses it through. This is the most important step a DIY filter clean can’t replace.

3. Condensate Drain Line Clear

As the system cools air, it produces condensation that drains away through a pipe. In Sydney’s humid climate, algae and mould grow in this pipe and can block it within a year. A blocked drain causes water to back up and drip from the indoor unit — damaging walls, ceilings, and flooring. The technician flushes the drain line and confirms it flows freely.

4. Refrigerant Pressure Check

Refrigerant is what moves heat between the indoor and outdoor units. Over time, small leaks can allow refrigerant to escape — reducing cooling capacity and causing the compressor to work harder. The technician checks system pressures against the manufacturer’s specification. A significant drop indicates a leak that needs to be located and repaired before a refrigerant recharge. This step requires an ARCtick-certified technician — it cannot be done by an uncertified provider.

5. Electrical Inspection

The technician inspects electrical connections at the indoor and outdoor units, checks the capacitor (which starts the motor and compressor), and confirms contactors are in good condition. Loose or corroded connections cause intermittent faults and can lead to compressor failure over time.

6. Outdoor Unit Inspection

The outdoor condenser coil and fan are checked for debris blockage, coil damage, and corrosion. In Sydney’s coastal areas, salt-laden air can corrode the aluminium fins on the outdoor coil. The technician clears any obstructions from around the unit and checks the fan blade for damage or imbalance.

7. Full System Test

The system is run in cooling, heating, and fan modes to verify all functions work correctly. The technician checks supply air temperature against the ambient to confirm the system is achieving proper temperature drop. Any abnormalities observed during the test are flagged before the technician leaves.

What Skycon Air’s Service Includes

Every Skycon Air split system service covers every item on this checklist — no shortcuts. Our licensed technicians work across all major brands including Daikin, Mitsubishi Electric, Samsung, Fujitsu, Hisense, Rinnai, and Actron. Any faults found during the service are reported and quoted before any additional work begins.

How Often Should This Be Done?

For most Sydney homes, once a year — ideally in spring — covers everything on this checklist. Households with heavy year-round use, pets, or allergy sufferers should consider a six-monthly service. For more on service frequency, see our guide: how often should you service your split system?

How Skycon Air Can Help

Skycon Air provides complete split system servicing across Sydney with transparent pricing and licensed technicians. Every service covers this full checklist — not a shortcut version. Book your service online or call to discuss your system.

Frequently Asked Questions

Can I do any of these steps myself?

The filter clean is the one step homeowners can and should do themselves every 4–6 weeks during heavy use periods. Everything else — coil cleaning, drain flushing, refrigerant checks, electrical inspection — requires the right tools, chemicals, and in some cases an ARCtick licence. Attempting these without training risks damaging the unit or voiding your warranty.

How long does a full service take?

A complete split system service typically takes 60–90 minutes for a standard single-zone unit. Multi-zone systems with multiple indoor units take longer. Skycon Air provides an estimated duration when booking.

What if the technician finds a fault during the service?

Any fault found is reported to you with a clear explanation and a quote for the repair before any additional work begins. You decide whether to proceed. Common finds include low refrigerant, a worn capacitor, or a partially blocked drain — all straightforward to fix at service time.

How do I know if my split system was properly serviced?

Ask for a service report. A professional service provider should be able to confirm what was done, what the refrigerant pressures were, and whether any issues were found. Skycon Air technicians walk customers through findings before leaving.

More articles you’ll like

View All
speak-img

What Size Split Air Conditioner Do I Need? Room-by-Room Guide!

Not sure what size split system you need for your Sydney home? This room-by-room sizing guide takes the g...
Read More...
blog-image

How Much Electricity Does An Air Conditioning Use?

At Skycon Air Conditioning, we understand the importance of keeping your home or business comfortable whi...
Read More...
brand-maintatnce

Split Air Conditioning Maintenance Checklist: Check now!

Not all split system services are the same. Use this checklist to know exactly what a professional mainte...
Read More...
1300 264 424